Slach Rubbermac Private Limited

Bale Cutter – A Rubber Machinery With A Monstrous Synonym

Posted by Admin on September, 19, 2020

A Bale Cutter is a piece of popular rubber machinery known as the Guillotine. Until they are fed into the batch mixer, the rubber must be cut into small pieces. This work is done to the satisfaction of most people by the rubber bale cutter. You can easily get one of these machines from a rubber bale cutting machine manufacturer.

Details and Specifications:


There have been guillotine devices in the past, with a set knife and a table moving upward. Hydraulic bale cutters are common in their present form.

The regular bale cutter is for bales with a capacity of 33.3 kg. The manages the entire range from 25 to 35 kg with Natural Rubber (NR) to Synthetic Rubber (SR). NR is commonly made of 33.3 kg or 35 kg (± 5 percent), in rectangular form and measurements 670 mm x 330 mm x 170 mm. Bulk SR like unvulcanized elastomer is usually placed into a thick rubber bale or slab packed into a thin plastic protective film. It is roughly 600 mm x 450 mm in size and 200 mm in weight.

Working Procedure:


Although a bale of this size can be directly applied to the batch blender, the bale cutter must have the correct weight to mix the compound mixture in a batch. The cutting section ranges from 600 to 750 mm with a cutting height of 300 mm in most common bale cutting systems.

A cutter or a precision blade, hydraulic cylinders, frame structure, and hydraulic power pack unit are installed in each system. Most manufacturing companies have roller conveyor or transporter belt in their ball cutters to hold the rubber bale on a blade and likewise release conveyors to transport cutting slices further apart from the blade. The hydropower supplies hydraulic oil and is provided by the hydraulic power package unit. You can easily contact a rubber bale cutting machine supplier, and get hold of one of these machines.

No user attention is needed other than during the installation of advanced rubber bale cutters. They have a continuous blade loop with a fixed speed of conveyor progression. These devices have a PLC controlled cutting and display unit with different guillotine functionality. The required data such as minimal slice width, the total amount of cuts or dwell time between cuts are preprogrammed. A pneumatically operated plate keeps the bale constant in some ball cutters throughout the cutting process.

When not tightly fenced in by interlocking doors and fastening guards to prevent the transmission to the cutting zone, bale cutters may become hazardous for an operator. It is therefore necessary to fully safeguard rubber bale cutters for safe operations.

Final Words:


The companies have been able to place their bale cutters as high-tech rubber machines for better performance cutting and efficiency thanks to user-friendly new technologies, protection, and automation. If you are looking forward to getting one of these machines anywhere in the world, then you can easily contact a rubber bale cutting machine exporter and have one for yourself.



This entry was posted on September, 19, 2020 at 11 : 00 am and is filed under Rubber Bale Cutting Machine. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required)
(required) (will not be published)

Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

WhatsApp Us